Return to site

What Is Masonry Repair

The strongest and most durable construction material for a long time has been the brick. In fact, there are so many buildings made of bricks that you can see standing up to today. But you need to know that there is also a weakness when it comes to masonry. That is why it is important for you to call a professional right away after you will discover some great moisture damage and crumbling bricks. And you should always do something right away if you will see that the mortar joints are decaying. If you want to know how you can prolong and preserve the structural integrity of your brickwork, then you need to read this article.

You will need some important tools. You will need an angle grinder with a 4 to 4.5 inch diamond blade, as well as a rotary hammer drill that has a flat chisel head bit. You should also use a flat blade in order to press the new mortar to the joint, as well as a tuck and a trowel pointer. To complete the repair, it is important to shape and smooth the wet paste using a joint raker or any other similar tool. A bag of mortar and a bucket is also needed for this.

It is important to know how bad the problem is so that a successful masonry by Plano chimney repairs will be done. You will know the extent of the problem by using a house key and scratch it on the joints in the middle of the brick. Take note that solid mortal will not crumble so it needs to be replaced if it will come out in chunks. A horizontal cut should be made using an angle grinder below and above each of the joints once all of the necessary information are gathered. Once the bad sections will be removed, a hammer drill should be used to work through the grooves and chisel them out. In cleaning out the new grooves, a stiff paintbrush is highly suggested.

A new batch of mortar is needed once the bad mortar will be removed. The bag of mortar should be mixed with water based on the instructions and the final consistency must be similar to a thick peanut butter. A glob of paste must be placed on top of the trowel and the trowel should be placed in the empty groove. The tuck pointer will be used to tightly pack the fresh mortar between the bricks. It is also important to make sure that the paste is not set and hard during the process of filling the grooves with fresh mortar. A new masoned joint usually is ready to strike after thirty minutes of application. So every time you will need a masonry repair, you need to make sure that you know the professionals to call. You may click here now.

All Posts
×

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OKSubscriptions powered by Strikingly